FS725 Rubidium Frequenzstandard
- ◊ 10 MHz and 5 MHz outputs
- ◊ 1 pps input and output for
- ◊ GPS synchronization
- ◊ 20 year aging less than 0.005 ppm
- ◊ Ultra-low phase noise (< −130 dBc/Hz at 10 Hz)
- ◊ Built-in distribution amplifiers (up to 22 outputs)
- ◊ RS-232 computer interface
- ◊ Two status alarm relays
FS725 integrates a rubidium oscillator (SRS model PRS10), a low-noise AC power supply, and distribution amplifiers in a compact, half-width 2U chassis. It provides stable and reliable performance with an estimated 20 year aging of less than 5 × 10−9 and a demonstrated rubidium oscillator MTBF of over two hundred thousand hours.
The FS725 is an ideal instrument for calibration and R&D laboratories or any application requiring a precision frequency standard. There are two 10 MHz and one 5 MHz outputs with exceptionally low phase noise (−130 dBc/Hz at 10 Hz offset) and one second Allan variance (<2 × 10−11). The FS725 can be phase-locked to an external 1 pps reference (like GPS) providing Stratum 1 performance. A1 pps output is also provided that has less than 1 ns of jitter and may be set with 1 ns resolution. Up to three internal distribution modules can be added to the FS725.
Each module has four 10 MHz outputs, one 5 MHz output, and one 1 pps output, all with the same low phase noise, harmonic distortion and jitter. An RS-232 interface allows direct communication with the rubidium oscillator. Using the provided Windows software, you can easily monitor and control 1 pps timing, and determine the instrument's operational status. There are two alarm relays that indicate the status of the rubidium oscillator lock state and synchronization to an external 1pps input. The relays are SPDT, providing both normally-open and normally-closed operation.
Download PDF: Datenblatt
|
